HPA Redline N7 Gen2 FCU V2 M4 Gear Box Kit By Redline Airsoft

Redline AirsoftSKU:RDP-N7V2-FCU-MACRO

Prezzo:
Prezzo scontato€399,00

Descrizione

The N7 GEN2 FCU is a Drop-in HPA system patented by
Redline, it uses a closed bolt system with discharge chamber
allowing excellent groupings of balls. The N7 GEN2 FCU works
with a 7.4V JST battery (not supplied) to operate its Solenoid
and its control computer (FCU), it can fire in semi and full-auto.
The most notable change from the N7 GEN1 is the elimination
of the external air line to the nozzle. We have also updated the
internal components and reduced the size of the inner
tube slightly.
Functionally however, it is identical to the original N7.
This means you get the same performance and easy setup
that the original N7 engines were known for.
Due to its true closed bolt design and balanced air nozzle return,
the N7 GEN2 FCU performs very well compared to an HPA open
bolt system.
The result is faster firing speed, tighter groupings, and greater
distance accuracy.
Like the stock N7, the N7 GEN2 FCU uses a mechanically
sealed dump chamber.
Rather than relying on a solenoid to control the volume of air
used to propel the BBs, the N7 GEN2 FCU fills an internal air
chamber to the pressure set by the user's external power
regulator.
When fired, this air chamber is mechanically sealed from the
feed and the contents of the chamber are released into the barrel
to propel the ball.
This feature contributes to the N7 Gen-2’s excellent shot to shot
consistency, with no air wasted due to improper dwell settings.
The FCU is programmable for:
1: Dwell setting.
2: Setting the maximum semi-automatic firing rate.
3: Automatic or burst mode setting.
4: Adjusting the rate of fire.
5: Anti-stress pulse adjustment.
6: Selector position setting.
Main features of the N7 GEN2 FCU:
True closed bolt, fully electro-pneumatic operation of the
HPA system.
Very simple setup, little or no adjustment required on the
FCU for good shooting results.
Easy adjustment thanks to its true closed bolt design.
Fixed area discharge chamber design.
Less "joule creep" than conventional HPA systems.
100% designed and made in the USA.
This HPA system is a spare part, it does not constitute a
guarantee of results, it is delivered without an installation
manual and is reserved for experienced and equipped
preparers. By purchasing this system, you declare that you
are technically able to install it and make the necessary
modifications to the replica for its proper functioning.
On products fitted with a trigger board, any breakage of the
plate and trigger selector contact buttons is not guaranteed
by the manufacturer. Regarding the plate selector, we
recommend that you do not force the button or push it in the
opposite direction during installation. Regarding the trigger
button, it is strongly recommended that the trigger stroke be
mechanically locked once the switch is activated to avoid
excessive pressure with the finger on the button.

Per info e/o acquisto veloce senza account:
info@softair-italial.it

Calcolo della spedizione

You may also like

Visto di recente