Descrizione
The SA-H02 carbine replica by Specna Arms is made out of zinc and aluminum alloy, with the use of steel
elements in the most vulnerable points of the replica.
Steel elements:
all the screws, pins and tactical sling swivels.
The SF type stock that houses the battery and the pistol grip are made out of polymer plastic.
The replica's body and the RIS rail set have been anodized, which guarantees a high degree of protection
against corrosion.
The painting of the replica itself was made by powdering, after the surface was sandblasted.
This ensures a much higher than usual abrasion resistance of the applied paint.
The manufacturers markings are located on the receiver.
elements in the most vulnerable points of the replica.
Steel elements:
all the screws, pins and tactical sling swivels.
The SF type stock that houses the battery and the pistol grip are made out of polymer plastic.
The replica's body and the RIS rail set have been anodized, which guarantees a high degree of protection
against corrosion.
The painting of the replica itself was made by powdering, after the surface was sandblasted.
This ensures a much higher than usual abrasion resistance of the applied paint.
The manufacturers markings are located on the receiver.
The replica has been fitted very well - in a way that has been observed almost exclusively in G&P or
Classic Army manufacturers - and perfectly balanced.
This ensures perfect maneuverability of the replica, and its weight is almost imperceptible after placing the
replica on the shoulder.
Classic Army manufacturers - and perfectly balanced.
This ensures perfect maneuverability of the replica, and its weight is almost imperceptible after placing the
replica on the shoulder.
The replica uses a quick spring change system, the so-called Enter & Convert ™.
This allows for quick and efficient adjustment of the replica's power to the conditions expected in the game
field without the need to have access to a workshop or a number of specialized tools - after removing the
gearbox from the replica's body, the process of replacing the spring itself takes literally a few seconds.
This allows for quick and efficient adjustment of the replica's power to the conditions expected in the game
field without the need to have access to a workshop or a number of specialized tools - after removing the
gearbox from the replica's body, the process of replacing the spring itself takes literally a few seconds.
The advantages of the Enter & Convert™ system cannot be overestimated. In the light of the tendency prevailing throughout Europe to apply legal limits of the muzzle velocity of the replica and the arrangements existing within
the environments themselves, this system provides the user with considerable opportunities and a lot of freedom.
The ESA ™ system allows you to quickly, with little to no effort change the main spring, and thus adjust the
muzzle velocity of the replica to the requirements of the game organizer.
This guarantees an ideal compromise between the effectiveness of firing your shots and your own safety
and the safety of other players.
the environments themselves, this system provides the user with considerable opportunities and a lot of freedom.
The ESA ™ system allows you to quickly, with little to no effort change the main spring, and thus adjust the
muzzle velocity of the replica to the requirements of the game organizer.
This guarantees an ideal compromise between the effectiveness of firing your shots and your own safety
and the safety of other players.
The replica has been fully adapted to work with Li-Po and Li-Fe batteries.
The set also includes an M90 spring, which allows you to reduce the initial muzzle velocity to ~ 310 FPS,
making it the replica perfectly adapted to operate at short distances or inside buildings.
The set also includes an M90 spring, which allows you to reduce the initial muzzle velocity to ~ 310 FPS,
making it the replica perfectly adapted to operate at short distances or inside buildings.
The gearbox, reinforced at the height of the cylinder head, houses a steel spring guide, which is an element
of the Enter & Convert ™ system, and steel gears mounted on 8-mm ball bearings. The system is secured by means of four anti-reversal latches.
A type 2 cylinder and a steel circuit-breaker are also used here.
The replica is factory-fitted with an accurate, rotating, polymer Hop-Up chamber, which allows for a very precise
and stable adjustment of the BB spin system.
The replica is equipped with a 22 mm RIS rail, a set of front RIS rails and an adjustable stock.
Metal flip-up sights are mounted on the upper RIS rail, but they can be easily replaced by any optoelectronic sights. Thanks to the retractable stock with a non-slip texture stock, it is possible to adjust the length of the replica to the body type and preferences of the operator. The standard flash hider is mounted on a 14 mm left-hand thread,
which allows the attachment of a silencer in its place.
of the Enter & Convert ™ system, and steel gears mounted on 8-mm ball bearings. The system is secured by means of four anti-reversal latches.
A type 2 cylinder and a steel circuit-breaker are also used here.
The replica is factory-fitted with an accurate, rotating, polymer Hop-Up chamber, which allows for a very precise
and stable adjustment of the BB spin system.
The replica is equipped with a 22 mm RIS rail, a set of front RIS rails and an adjustable stock.
Metal flip-up sights are mounted on the upper RIS rail, but they can be easily replaced by any optoelectronic sights. Thanks to the retractable stock with a non-slip texture stock, it is possible to adjust the length of the replica to the body type and preferences of the operator. The standard flash hider is mounted on a 14 mm left-hand thread,
which allows the attachment of a silencer in its place.
To increase the realism, the replica was also equipped with a working bolt release mechanism.
The set with the replica also includes a steel hi-cap magazine with a capacity of 300 BBs.
The set does not include a battery or a charger.
The set includes:
replica
magazine
mechanical sights
additional main spring
300bb High Cap Magazine.
Inner barrel: 270mm.
Tamiya small pug.
Lenght: 700 > 785mm.
Weight: 2680gr.
Per info e/o acquisto veloce senza account:
info@softair-italia.it
additional main spring
300bb High Cap Magazine.
Inner barrel: 270mm.
Tamiya small pug.
Lenght: 700 > 785mm.
Weight: 2680gr.
Per info e/o acquisto veloce senza account:
info@softair-italia.it